Nitgen eNBioAccess-T3 Attendance & Access Control Solution

eNBioAccess-T3: Nitgen’s new generation of fingerprint attendance and access control system. Authenticate with fingerprint, RF card or password.

Nitgen eNBioAccess-T3


In stock

Questions? Ask our experts:  877-917-3287.
Need over 25 units? Request a Quote

  • eNBioAccess T3 (SW250-S / M / R) is a complete access control & time and attendance solution.
  • Several authentication modes: Fingerprint, RFID Card, PIN.
  • Capacity for 10,000 users (20,000 templates) and 100,000 logs.
  • Multi-Language supported with visual indication.

Product Description

eNBioAccess-T3 is Nitgen’s efficient yet affordable access control & time and attendance solution. Nitgen has created this access control device with carefully chosen technologies and components to check as much as boxes as possible without burning a hole in your pocket.

For a start, Nitgen used its proprietary fingerprint recognition algorithm while developing eNBioAccess-T3, which topped charts at FVC (Fingerprint Verification Competition), a renowned platform to test efficiency and performance of fingerprint algorithms.

Apart from the world’s best fingerprint recognition algorithm, eNBioAccess-T3 is equipped with the ability to perform fingerprint image quality check, which enables it to determine whether to go ahead with a scan or ask user to perform a new scan. Ability to perform fingerprint image quality check helps eNBioAccess-T3 to produce more dependable results.

Biometric fingerprint recognition is only half the story, this access control & time and attendance solution can read your RF cards, if you prefer it that way. The RF card sensor is located just below the fingerprint sensor. It can read standard, high frequency and low frequency RF cards depending on the device model.

eNBioAccess-T3 is highly configurable and can adjust to your use case effortlessly. It can be integrated with a deadbolt, electromagnetic lock, door strike, automatic door to lay access control. You can also configure it to deploy time and attendance based access control, in which door unlocking can be linked with clock in / clock out / absence / return, etc., resulting in more control on employee time tracking and productivity.

eNBioAccess-T3 is not only a performer but a survivor as well. It can withstand harsh environmental conditions like dust, moisture and even liquid spills. It is an IP54 rated device, which means that it can survive water projection with a nozzle and does not let dust or moisture to sneak in. Invasion of dust or moisture can negatively affect the performance if they settle on internal parts like e.g. optics.

eNBioAccess-T3: Salient Features

Multi Factor Authentication

  • Higher security with combined use of fingerprint authentication, RF card or password


  • Sealed construction rated at IP54 makes it dustproof and waterproof

Function Key

  • User-defined functions with F1 to F4 touch buttons
  • Attendance linked access control with Clock In/Clock Out/Absence/Return

Superior Matching Engine

  • Nitgen’s superior matching technology rank 1st in FVC (Fingerprint Verification Competition)

USB Memory Slot

  • Easily perform offline data transfer using USB memory stick if require

2.4” TFT Color LCD

  • Notice / Status Bar
  • Wallpaper with company logo

Usability and Applications

While designing eNBioAccess-T3, Nitgen has ensured that usability does not get affected while loading the device with features. eNBioAccess-T3 offers a perfect blend of usability, security and useful features. No gimmicky feature is there just to fill the spec-sheet or promotional material.

All recognition methods used in the device are quite useful. Access control or time and attendance can be setup using RF card, fingerprint or password. For security inclined applications, you can even setup multi factor authentication.

The fingerprint sensor comfortably sits between the touch panel and the card sensor, when installed on an optimum height; it is set to deliver good user experience. Along with numeric and other important touch buttons, four functions keys (F1 to F4) are provided on the touch panel, which are user definable and can be used to set up attendance based access control.

Nitgen has crafted eNBioAccess-T3 to blend in any use case as it was created for that. From commercial outfits to institutions and NGOs to government buildings, it can be deployed for secure access as well as time tracking.

eNBioAccess-T3: Specifications

CPU S3C6410 (ARM11 667MHz)
Memory 256MB DRAM / 256MB Flash
Display 2.4” TFT Color LCD
Sensor Optical / 500 DPI
Lock Deadbolt, EM Lock, Door Strike, Automatic Door
1:1 Time < 0.2 sec.
1:N Time < 1 sec.(4,000 templates)

Template Capacity 20,000 templates (2 templates / 1 finger, 10,000 users)
Authentication Type Fingerprint, Password, RF card
Log Capacity 100,000 logs
Communication TCP/IP, Wiegand In/Out (26/34 bit)
Environment -20~60 ℃ / < RH 90%
Certificate KC, CE, FCC
Dimensions 75(W) x 182.4(H) x 39.2(D) mm

Still not convinced? We’ve got plenty more features lined up for you


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

  • nitgen ubio-x slim

    Nitgen UBio-X Slim

    Add to cart
  • nitgen ubio-x pro

    Nitgen UBio-X Pro

    Add to cart
  • Fingkey Access Fingerprint Access Control

    Nitgen Fingkey Access

    Add to cart
  • Sale! nitgen enbioaccess-t9

    Nitgen eNBioAccess-T9

    Add to cart

Just Some of Our Happy Clients

You have been great. We purchased biometric readers from Bayometric based on price. We were contacted by Bayometric to insure the readers would meet our needs. Our order was received promptly without issue. I would purchase from Bayometric again without hesitation.- Ben Wing, Rockiingham County

Success Stories

Bayometric’s tried and trusted fingerprint identification technology has been seamlessly incorporated into various existing security environments, providing unmatched security solutions to customers in different verticals world-over.

DIIRI Selects “Print to Card” for Employee Background Check

DIIRI has significantly upgraded its employee background check process by procuring Bayometric's “Print to Card” software.

Ultimate Defense choose Bayometric’s ATF Live Scan

Ultimate Defense chooses Bayometric’s ATF Live Scan software for ATF eForm 4 processing for the transfer of firearms and other NFA items.

Buffalo Valley Arms Picks Bayometric’s Fingerprint Scanner

Buffalo Valley Arms an FFL dealer based in Moran WY, picks Bayometric’s NFA-approved fingerprint scanner.

Scaled Composites Adopt Secure Web Fingerprint Transmission

Scaled Composites LLC adopted Bayometric’s Secure Web Fingerprint Transmission (SWFT) system for employees’ security clearance.

Unbeatable Prices

All our hardware products come with one year warranty.

Worldwide shipping

All our hardware products come with one year warranty.

Great Warranty

All our hardware products come with one year warranty.