|
FS84 ethernet Fingerprint Authentication Embedded OEM Module (eFAM) combines both high performance fingerprint scanner and recognition engine into one device. It has internal memory that can store up to 2500 fingerprint templates.
Any host system can control the FS84 via standard Ethernet interface to enroll and recognize fingerprints. The recognition result is sent from FS84 to the host.
The availability of 4 wires serial interface allows FS84 ethernet Fingerprint Authentication Embedded OEM Module to be used for both embedded and remote fingerprint recognition applications. Fingerprint images and templates can be transferred between FS84 and host system via serial and ethernet interface.
FS84 ethernet Fingerprint Authentication Embedded OEM Module has 1 output channel (for external relay control) and 2 input channels (for door sensor and switch). Hence, it can be used as a fingerprint access control device.
Bayometric provides free development tools to customers for integrating the FS84 with any host system.
|
| Specifications-Fingerprint Scanner |
| Fingerprint scanning window size |
16x24mm |
| Image resolution |
480x320 pixel, 500 DPI |
| Raw fingerprint image file size |
150K byte |
| Light source |
Infrared LED |
|
| |
| |
| Specifications-Fingerprint Recognition engine |
| Processor |
Analog Device ADSP-BF532 |
| Memory |
16MB SDRAM and 16MB Flash memory |
| Storage Capacity |
Can store up the 2500 fingerprint templates |
| Software |
Comes with proprietary software and fingerprint recognition algorithm
|
| Fingerprint recognition accuracy |
FAR-10-6, FRR-10-2 |
|
| |
| |
| Electrical Specifications - FS84 Ethernet OEM Fingerprint Module |
| Interface |
4 wires serial interface: VCC, GND,
TX and RX
|
| Ethernet Communication Speed |
10M |
| Supply voltage |
12V |
| Max Current consumption |
250mA |
| Input / Output channels |
1output and 2 input channels for controlling external devices
2 output channels for controlling external LEDs
|
| ESD |
contact 8KV & Air discharge 16KV no permanent damage
|
|
| |
| |
| Physical Specifications - FS84 Ethernet OEM Fingerprint Module |
| Buzzer |
Built in buzzer for status indication |
| Weight |
200 grams |
| Size |
105mm(L) x 80mm(W) x 40mm(H) |
| Operation temperature |
-20 to +55 Degree Celsius |
| Sanning Window |
Waterproof Finger Scanning Window |
|
|
|
|
|
|
|
|
